Tools For Canine Rehabilitation, Fitness, and Performance
Home Cavaletti Assembly
Unwrap the crossbar and end supports.Remove the screws from the crossbar, and insert into end support.Press the screws flush into the end support. About 1/4′ protrudes.Line up the screw with the threaded fasteners in the end of the crossbar.Assembly should be on a flat surface!Firmly tighten the screws with a Phillips screwdriver.The upright and crossbar should fit flush together.Unwrap the side rails.Remove the threaded sleeve and knob.Place the threaded sleeve through the slot as shown.Align the threaded sleeve with the slot in the upright, from the “inside”.Snug the rail against the upright, with the sleeve pressed into the slot.Insert the threaded know into the sleeve, and snug it down.Each corner is completed similarly. It’s ok to complete the uprights and crossbars, then install the rails.
